Mirka Abranet Backing Pads (See below for more information)

Description

[vc_row][vc_column][vc_column_text]Mirka Abranet Backing Pads

All individually sold

Please see dropdown for options

More information below;

8294791211 – Backing pad medium for grip disc, delivered with one pad protection disc including user instructions.

8292502031 – A soft 125 mmm backing pad, especially suited for profile sanding and where a soft edge is needed.

8292502011 – This backing pad is suitable for our multihole configuration 125 mm (5”) 17H, available in the Gold product range. This backing pad can also can be used on Festo (8+1H), Bosch (8H) and Black & Decker machines.

829502511 – Fits all Mirka® 150 mm (6”) sanders. This 130g backing pad gives you the ability to switch sizes and use 125 mm (5”) sanding discs.

8292502021 – A 125 mm backing pad recommended for heavier sanding applications where higher stock removal is needed.

8295592111 – Backing pad medium for Abranet discs. Delivered with a pad protector and user instructions.

8292605031 – A soft 150 mmm backing pad, especially suited for profile sanding and where a soft edge is needed.

8292605011 – A 150 mm (6”) backing pad with a central air inlet. The air channels leading to the center of the backing pad has an increased air flow and therefore the dust is removed efficiently.

8292605021 – This 150 mm backing pad is recommended for heavier sanding applications where higher stock removal is needed.

8295692111 – Backing pad medium for net discs. Delivered with a pad saver and user instructions.

8295486111 – Uni-Backing Pad for grip discs. Delivered with one Pad Protector and user instructions. This pad is suitable for Festool Multi-Jetstream system.

8295494111 – Abranet medium density Unipad 150 mm (6″) for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6″) pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.

8295495111 – Abranet hard density Unipad 150 mm (6″) for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6″) pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.

8295885111 – This 200 mm (8 in.) Net Backing Pad with 89 holes is unique and designed only for MIRKA ROS2-850CV two-handed random orbital sander.

.[/vc_column_text][/vc_column][/vc_row]

Additional information