Description

Finixa Easy Seam Sealer on a Roll – Different Sizes Available (ESS 06 / ESS 10)

Available Sizes

• 6mm x 9mm (ESS 06)
• 8mm x 9mm (ESS 08)
• 10mm x 9mm (ESS 10)

Key features

• OEM profile
• For plugging seams on doors, bonnets and boot lids
• Can be applied quickly and easily
• Heat resistant and can be overpainted immediately
• ESS 06: for Japanese, Korean and French cars
• ESS 08: most of the German cars (Mercedes, Volkswagen, Audi)
• ESS 10: BMW, vans and large SUVs

Product Details

• Corrosive to metals: no
• Elongation at break: 326 %
• Free of isocyanates: yes
• Free of silicones: yes
• Length: 900 cm
• Maximum temperature resistance: 90 °C
• Minimum processing temperature: -30 °C
• Shore-A hardness: 85
• Skinformation – 23°C / 55%RH: 20 minutes
• Thickness: 1.9 cm
• Type: roll
• VOC: 0.2 g/L
• Width: 10 cm
• Workable surface state: dry
• Colour: off white
• Dry storage: yes
• Freezing resistant: yes
• Material: thermoplastic elastomers
• Minimum storing temperature: 5 °C

Application

ESS application – Directions for Use:

1. Surface Preparation: Ensure all surfaces are clean, dry, and free of grease or dust.
2. Measure: Cut the desired length of sealer from the roll.
3. Apply: Apply a fine coat of adhesion promotor(TSP 030) to the surface and leave for 5 minutes. Peel the backing and apply the seam sealer directly onto the surface.
4. Press: Use a roller or your fingers to press down firmly, ensuring good adhesion and a watertight seal.
5. Curing: Can be overpainted immediately but fully cured after 24 hours.

Use With:

Finixa Roller (ESS 20) for use with Easy Seam Sealer (ESS 06 / ESS 10)

Additional information