Finixa Easy Seam Sealer on a Roll – Different Sizes Available (ESS 06 / ESS 10)
Available Sizes
6mm x 9mm (ESS 06)
8mm x 9mm (ESS 08)
10mm x 9mm (ESS 10)
Key features
OEM profile
For plugging seams on doors, bonnets and boot lids
Can be applied quickly and easily
Heat resistant and can be overpainted immediately
ESS 06: for Japanese, Korean and French cars
ESS 08: most of the German cars (Mercedes, Volkswagen, Audi)
ESS 10: BMW, vans and large SUVs
Product Details
Corrosive to metals: no
Elongation at break: 326 %
Free of isocyanates: yes
Free of silicones: yes
Length: 900 cm
Maximum temperature resistance: 90 °C
Minimum processing temperature: -30 °C
Shore-A hardness: 85
Skinformation – 23°C / 55%RH: 20 minutes
Thickness: 1.9 cm
Type: roll
VOC: 0.2 g/L
Width: 10 cm
Workable surface state: dry
Colour: off white
Dry storage: yes
Freezing resistant: yes
Material: thermoplastic elastomers
Minimum storing temperature: 5 °C
Application
ESS application – Directions for Use:
1. Surface Preparation: Ensure all surfaces are clean, dry, and free of grease or dust.
2. Measure: Cut the desired length of sealer from the roll.
3. Apply: Apply a fine coat of adhesion promotor(TSP 030) to the surface and leave for 5 minutes. Peel the backing and apply the seam sealer directly onto the surface.
4. Press: Use a roller or your fingers to press down firmly, ensuring good adhesion and a watertight seal.
5. Curing: Can be overpainted immediately but fully cured after 24 hours.
